Industrial Gateway

Industrial Gateway

The industrial gateway is a powerful, PLC-based solution, enabling physical division of the industrial networks and conversion of the protocols between them. Conversion of the protocols is done via device’s proprietary format, allowing it to serve also as an industrial firewall system.

The gateway is usually based on Regul R200 programmable logic controller (PLC) with several network interfaces. In case a redundancy is required for the gateway, it could be assembled with the Regul R500 or R600.

The industrial gateway is designed to:

  • Receive data via OPC DA 2.0/3.0, OPC UA, or IEC 60870-5-101/104
  • Convert received data internally into own proprietary protocol
  • Transfer data via IEC 60870-5-101/104, or Modbus RTU/Modbus TCP

Features

  • 1 x RS-232 interface (Modbus RTU or IEC 61870-5-101)
  • 1 x RS-485 interface (Modbus RTU or IEC 61870-5-101)
  • 2 x RJ45 Ethernet interface (OPC DA 2.0/3.0, OPC UA, IEC 61870-5-104)
  • Maximum transfer speed of float type data via Modbus RTU – 1,000 parameters/sec.
  • Maximum transfer speed of float type data via IEC 60870-5-101 – over 1,000 parameters/sec, depending on the frequency of changes in data

An alternative of the industrial gateway solution for the use in power industry, is Automatic Load-Frequency Control System.

Please leave your contact details below and our manager will contact you shortly.

Name:*
Phone:*
Company:
Message:
×

To receive a download link to the manuals, please, provide your contact details

Name:*
E-mail:*
×

To download the fully-functional software, please, leave your contact details in the form below. Feel free to explore it and use free of charge in your projects with Regul PLCs.

By using this form you agree with the storage and handling of your data by this website.

×