Regul R600 PLC

Regul R600 is a high-availability real-time programmable logic controller, designed for the use in process industries, where additional electromagnetic protection is preferred.

APPLICATIONS

  • High-availability process control systems for:
    • Steam and gas turbines (control and emergency protection)
    • Oil pumping stations and gas compressors
    • Main and auxiliary systems at power stations
    • Fire and gas systems
    • Water management systems
  • Fiscal applications (for example, LACT units)

REDUNDANCY

  • Hot swapping of all modules, hot-standby CPU
  • Redundancy of: internal bus, CPU, CPU interconnection, I/O modules, power supply modules, SCADA connection
  • Frequency measurement and digital I/O module with 2oo3 voting

FEATURES

  • Intel Atom processor, 1 Gb RAM, 2 Gb SSD; microprocessors in I/O modules
  • 1 ms scan time; 1 ms (5 ms with redundancy) minimum application cycle time
  • Redundant ring high-speed internal data bus
  • Special firmware with MySQL database server
  • Web visualization option from the CPU module
  • Modules with channel, group, common galvanic isolation
  • Modules with individual or shared ADC per channel
  • Modules with support of HART
  • Up to 12 modules in a rack, up to 255 racks, up to 10 km (via fiberoptic line)

COMMON FEATURES OF REGUL RX00 PLCS

  • Programming with IEC 61131-3 languages + CFC
  • Supports Modbus TCP, Modbus RTU, OPC DA/UA, IEC 101, IEC 104
  • GPS/GLONASS receiver in CPU module
  • RJ45 and fiberoptic connections
  • In-module event archiving
Minimum application cycle time1 ms (5 ms in redundant operation)
Scan time1 ms
Switchover time from main to standby controller5 ms
Timing accuracy50 µs
ProcessorIntel Atom
RAM2 GB
SSD4 GB (optional up to 64 GB)
Mean time between failures (MTBF) for a controller module150 000 hours
Input power18…36 VDC
85…264 VAC/120…370 DC
I/O module size (W x H x D)30 х 267 х 186 mm
Operating temperature-40 to +60 °С
ApprovalsCE, EAC, GOST-R, FCC-ready

Supported interfaces

  • RS-232 (9-pin, full duplex, speed 300–115200 bps, opto-isolation 500/1500 V, overvoltage protection)
  • RS-422/RS-485 (9-pin, speed 300–115200 bps, full-channel opto-isolation 500/1500 V, overvoltage protection) – up to 96 ports per controller
  • Ethernet 10/100/1000 RJ-45 (full duplex) – up to 4 ports per CPU
  • Ethernet 10/100/1000 FO (single-mode, multi-mode) – up to 2 ports per CPU

Supported communication protocols*

  • IEC 61870-5-101 (master/slave)
  • IEC 61870-5-104 (master/slave)
  • Modbus RTU (master/slave, with expansion capabilities)
  • Modbus TCP (master/slave, with expansion capabilities)
  • OPC DA, OPC UA
  • EtherCAT

*Additional communication protocols, including nonstandard ones, can be implemented according to your requirements.

Supports various redundancy schemes:

  • 100% full backup
  • Backup for only the CPU and bus controller/power supply units
  • Combined backup schemes

Backup parameters:

  • Switchover time: less than 5 ms
  • Redundant data transmission protocol: UDP
  • Duplicated communication channels between processors
  • Automatic synchronization of the application program

Transfer of control conditions:

  • Based on the results of PLC bus diagnostics
  • Involves stopping the application
  • Occurs in the absence of communication with the master CPU

Part-numberDescriptionNumber of channels (ports)
CPU MODULES
CU 00 061Processor module
* Redundancy support
* Intel Atom E640, 1Gb RAM, 1 x 2Gb, 1 x 4Gb Flash, RS-232, RS-485, 2 x RJ45, 2 x SFP, GPS/GLONASS
-
CU 00 071Processor module
* Redundancy support
* Intel Atom E640, 1Gb RAM, 1 x 2Gb, 1 x 4Gb Flash, VGA, RS-232/RS-485, 2 x RJ45, 2 x SFP, 2 x USB host, GPS/GLONASS
-
CHASSIS
CH 07 011Chassis with 7 slots (1 PU and 5 extension slots)-
CH 14 011Chassis with 14 slots (1 PU and 12 extension slots)-

POWER SUPPLY MODULES
PP 14 011Power supply module 24V DC, 75W power unit controller module
* Redundancy support
-
COMMUNICATION MODULES
CP 04 011Communication processor RS485 (Modbus RTU, IEC-61870-5-101, user protocols)4
ANALOG MODULES
AI 16 011Analog input module
* Measurement range - 0…20 mA, 4…20 mA
* Measuring accuracy under normal conditions - ±0.1%
* Common galvanic isolation
16

AI0 8 021Analog input module
* Measurement range - 0…20mA, 4…20mA
* Support of HART protocol
* Measuring accuracy under normal conditions - ±0.1%
* Channel galvanic isolation
8
AI 08 031Analog input module
* Thermal resistance range - 20…400 Ohm
* Supported thermal resistances - Cu50, Cu100, Pt50, Pt100, Ni50, Ni100
* Support of thermocouples
* Measuring accuracy under normal conditions - ±0,1%
* Common galvanic isolation
8
AI 08 041Analog input module
* Measurement range (software-defined) - 0…10V,-10…+10V,0…20mA,4…20 mA
* Measuring accuracy under normal conditions - ±0.025%
* Channel galvanic isolation
8
AO 08 011Analog output module
* Control signal formation range - 0…20mA,4…20 mA
* Control signal formation accuracy under normal conditions - ±0.1%
* Channel galvanic isolation
8
DIGITAL MODULES
DI 32 01124 VDC discrete input module
* Group galvanic isolation
32
DO 32 01124 VDC/0.5A discrete output module
* Group galvanic isolation
32
PULSE COUNTING MODULES
DA 03 011Pulse counting module
* Channel supply voltage - 3, 5, 12, 24 V
* Frequency measurement range - 1 Hz…500 kHz
* Frequency generation range - 1 Hz…10kHz
* Measurement range of pulse quantity - 1 to 264 (with overflow attribute)
* Measuring accuracy under normal conditions - less than ±0.01%
* Pulse counting accuracy - ±1 pulse
* 3 x counting channels
* 1 x generator channel, 1 Hz–10 kHz
* 6 x DI channels of 24 VDC
* 6 x DO channels of 24 VDC, 0.5 A
* Channel galvanic isolation of the counting channels
3/1/6/6
DA 03 021Pulse counting module
* Channel supply voltage - 5,12,24 V
* Frequency measurement range - 1Hz…500kHz
* Frequency generation range - 1 Hz…10kHz
* Measurement range of pulse quantity - 1 to 264
* Measuring accuracy under normal conditions - less than ±0.01%
* Pulse counting accuracy - ±1 pulse
* 3 x counting channels
* 1 x generator channel, 1 Hz–10 kHz
* 6 x DI channels of 24 VDC
* 6 x DO channels of 24 VDC, 0.5 A
* Automatic safety device capability
* Channel galvanic isolation of the counting channels
3/1/6/6

SOFTWARE
Epsilon LD – programming and configuration software

MANUALS
To receive the manuals, please, send us a request with the button “Ask for manuals” above. Will be delivered to your e-mail address.

Regul R600 System Manual (DPA-309, v2.12)
Redundancy Manual (DPA 302.4)

Epsilon LD User Manual (DPA-302, v2.1)
Epsilon LD IEC-104 User Guide
Epsilon LD Modbus User Guide
Epsilon LD HART User Guide

CERTIFICATES
EC Declaration of Conformity

Overall and Installation Dimensions

Overall and Installation Dimensions of PLC Regul R600

Please leave your contact details below and our manager will contact you shortly.

Name:*
E-mail:*
Phone:
Company:
Message:
Please, confirm you are not a robot:
×

To receive a download link to the manuals, please, provide your contact details

Name:*
E-mail:*
Word Verification:
×

To download the file, please, leave your contact details in the form below.

By using this form you agree with the storage and handling of your data by this website.

×